PREMIUM WARRANTY UPGRADE COVERAGE:

• Engine: Cylinder Block (excluding cracks and porosity), cylinder bores and liners (excluding cracks
  and porosity), crankshaft, crank main bearings, big end bearings, oil pump, con-rods,
  gudgeon pins, small end bearings, pistons, piston rings, cylinder head (excluding cracks,
  porosity), rocker shaft, rockers, hydraulic lifters, camshaft and cam followers, push rods,
  camshaft bearings, inlet and exhaust valves, valve springs, valve guides, cylinder head
  gasket, inlet manifold, timing gears, timing chains, timing belt/chain tensioner, flywheel
  (excludes dual-mass flywheel) or flex plate, starter ring gear. (excludes overheating, decoking,
  burnt, pitted and sticking valves).
  Timing belts are covered provided that the last due change of belt has taken place as
  specified by the manufacturer’s schedule (proof required).
  Rotary Engine: Rotors, vanes, rotor seals, rotor central shaft.
• Manual gearbox: Gears and gear clusters, selectors and shafts, synchromesh assemblies, ball and roller
  bearings, needle bearings, bushes and transfer gears.
• Automatic gearbox: Governor, valve block, oil pump, gears, brake bands, clutches, seals, servos, shafts, bearings
  and bushes, modulator valve and transfer gears. Torque Converter:Failure of any internal mechanical parts.
  Continuously Variable Transmission (CVT/CTX): Internal clutches, planetary gears, reduction gears, shafts, variable pulleys, thrust link drives, internal seals, bushes and bearings.
• Brakes: Brake master cylinder, Wheel cylinders, callipers, brake bias/restrictor valve, vacuum servo and brake vacuum
  pump, Anti Lock Brake System (ABS): Factory fitted ABS are covered (excludes wiring and connection faults).
• Clutch: Master and slave cylinders, clutch cable including self-adjusting mechanism and clutch
  damper.
• Differential: Internal shafts, bearings and bushes, thrust washers, spacers and bevel gears. Planetary gear
  assembly, crown wheel and pinion assembly. Includes front, rear and centre differentials
  (excludes viscous couplings and fluid differentials).
  Front - Wheel Drive: Drive shafts, universal joints and couplings and constant velocity joints (excludes gaiters and
  bushes).
  Rear - Wheel Drive: Drive shafts, universal joints and couplings, constant velocity joints, half shafts and bearings
  (excludes gaiters and bushes).
• Engine Cooling System: Water pump, Engine thermostat, thermostat housing, viscous fan coupling, engine temperature, gauge
  sensor, engine oil cooler, heater matrix, radiator and expansion tank.
• Electrical System: Starter motor and alternator, Voltage regulator, starter solenoid (inertia drive starters), indicator relay, front and rear windscreen wiper motor, front and rear windscreen washer motor, ignition coils, electric window motors and switches, horn, glow plug relay (diesel vehicles), electric sun roof motor and switch, central locking systems (excluding remote control unit and wiring), indicator and wiper switches (column stalks), heater fan motor, fuel tank sender unit, electric fuel pump, temperature sensing switch, oil pressure sensor, speedo head and speedo transducer, heated rear screen (element failure only), door mirror motors and switches.
• Wheel Bearings: Front and rear wheel bearings.
• Propshaft: Universal joints and couplings. Bearings and rubber couplings. Includes front and rear
  transfer shafts 4X4 vehicles (excludes gaiters).
• Fuel system (diesel and petrol): Carburettors, automatic choke, lift pump, mechanical or electrical fuel pumps and tank
  sender unit.
• Fuel injection system: Throttle body, airflow meter, idle control valve, cold start valve, warm up regulator, overrun
  cut off valve, throttle potentiometer, fuel accumulator, pressure regulator, map sensor
  (except injectors and heater plugs).
• Front and rear suspension: Upper and lower wishbones, ball and swivel joints, anti roll bars, mountings, torsion bars and
  coil springs.
• Engine Management (ECU): Engine Electronic Control Unit.
• Transfer Box (4X4): Transfer gears, selectors, transfer shafts, needle and roller bearings, output shafts and
  bushes
• Steering (Including power assisted steering): Steering rack and pinion (not gaiters), steering box, power steering rack and pump, power steering reservoir and idler box.
• Working Materials: Oils, oil filter and anti-freeze are covered only if it is essential to replace them because of the
  failure of a part which is covered under this warranty.
• Casings: If any of the covered parts fail and this damages the casing, it will also be covered.
• Turbocharger / Supercharger / Kompressor: The complete unit is covered providing it is of original manufacturer’s equipment (includes the wastegate if it is an integral part of the unit and cannot be bought separately).
• Air Conditioning / Climate Control: Factory fitted systems are covered (excludes pipes, unions, wiring, receiver drier and cost of
  regassing).
• Catalytic Converter

We pride ourselves on aiming to provide the customer the best used car buying experience viable.

We know what as hassle buying a used item can be, hence why we check our cars so thoroughly before handover to the customer (there is no point us selling a car with issues, it causes us more hassle than the customer, so you can rest assured we do our due diligence well!).

However as they are used items and often contain sometimes up to 90,000 individual components, inevitably something may fail at any time. Upon occurrence of this unlikely event, we provide our own warranty to solve the issue as quickly, fairly and hassle-free as possible.

So we offer our own repair warranty on the following mechanical or electrical items, up to the maximum claims limit - full terms and conditions on request. We choose who will fix the issue and the parts used, in some cases these are to be expected to be good condition used items.